Custom-extruded profiles and multi-chamber thermal breaks engineered for Italian residential, commercial, and restoration projects.
The Italian building envelope sector is currently undergoing a profound transformation driven by stringent European Union decarbonization goals, national energy efficiency decrees (D.M. 26/06/2015 "Requisiti Minimi"), and evolving architectural preferences. Historically dominated by traditional side-hung casement windows and exterior timber shutters, the Italian market is rapidly adopting single-hung vinyl windows for modern multi-family renovations, commercial developments, and suburban villa projects.
For Italian distributors, general contractors (Imprese Edili), and real estate developers, securing reliable OEM/ODM manufacturing partners who can balance authentic vertical sliding aesthetics with rigorous EU mechanical and thermal standards is critical. Single-hung vinyl windows engineered for the Italian market must satisfy complex local requirements:
Standard off-the-shelf fenestration profiles rarely align with Italian architectural restoration codes or modern urban density requirements. Our OEM/ODM framework allows Italian buyers to specify:
How our fusion-welded virgin uPVC profile matrix outperforms traditional timber and non-thermal aluminum in Mediterranean conditions.
Formulated with high-concentration Titanium Dioxide ($TiO_2$) and organic calcium-zinc ($Ca-Zn$) stabilizers. Certified under EN 12608 Class S (Severe Climate) to prevent discoloration, chalking, or thermal warping under intense Southern Italian Mediterranean UV irradiance.
Utilizing 4-point automated CNC heat-fusion welding at 245°C, creating a continuous, seamless frame seal. Unlike mechanically screwed aluminum or timber joints, welded corners eliminate water ingress, frame racking, and air leakage across decades of operational stress.
Extruded with 5-to-7 internal thermal air pockets engineered to eliminate convective heat transfer. High-stress chambers house corrosion-resistant, hot-dip galvanized steel reinforcement channels (1.5mm–2.0mm thickness) ensuring structural stability against wind loads up to Class C5 (EN 12210).
Insulating glass units (IGUs) incorporating warm-edge Swisspacer technology, argon gas cavity fill, and low-emissivity soft-coatings. Delivers exemplary light transmittance (VLT 65%) while rejecting 95% of damaging infrared heat, crucial for Italian summer thermal control.
Precision-calibrated stainless steel coil spring balance systems engineered for smooth, finger-tip vertical motion. Rated for over 25,000 continuous opening cycles without tension drift or hardware failure, exceeding standard commercial performance criteria.
Specially configured asymmetric dual-pane glass thickness (e.g., 6mm + 16Ar + 4mm) combined with PVB acoustic laminated glass. Achieves sound insulation performance up to $R_w = 45\text{ dB}$, isolating indoor spaces from urban traffic and railway noise in high-density Italian cities.
Rigorous testing metrics measured in accordance with European Norms (EN Standards) for fenestration excellence.
| Performance Indicator | Amar OEM Single-Hung uPVC | Standard Non-Thermal Aluminum | Traditional Softwood Timber | EU Norm Test Standard |
|---|---|---|---|---|
| Overall U-Value ($U_w$) | 0.78 – 1.2 W/m²K | 2.8 – 3.5 W/m²K | 1.6 – 2.0 W/m²K | UNI EN ISO 10077-1 |
| Air Permeability | Class 4 (Highest Seal) | Class 2 | Class 3 | UNI EN 12207 |
| Watertightness | Class E1050 (1050 Pa) | Class 5A (200 Pa) | Class 7A (300 Pa) | UNI EN 12208 |
| Wind Load Resistance | Class C5 / B5 | Class C3 | Class B3 | UNI EN 12210 |
| Acoustic Rating ($R_w$) | 38 dB – 45 dB | 28 dB – 32 dB | 32 dB – 36 dB | UNI EN ISO 717-1 |
| Maintenance & Service Life | Zero Paint; 35+ Year Life | Anodizing Fades; Cold Bridges | Requires Painting Every 3 Yrs | Accelerated Life Cycle Test |
Optimized structural and thermal configurations designed for specific microclimates and regional architectural typologies in Italy.
Facing harsh winter sub-zero temperatures and strict urban noise pollution standards in cities like Milan and Turin. Our OEM single-hung units utilize triple-sealed warm-edge IGUs ($U_w \le 0.8 \text{ W/m²K}$) and acoustic laminated glass to ensure indoor thermal warmth and peaceful interiors near transport hubs.
Restoration projects in Florence, Chianti, and Rome demand fenestration that respects heritage sightlines. We provide custom-moulded external sash profiles, internal decorative Georgian bars (Inglass grids), and authentic Golden Oak or Walnut textured foil finishes that satisfy regional aesthetic guidelines while delivering 21st-century energy conservation.
Coastal marine environments introduce extreme salt-spray oxidation and severe solar solar thermal gain. Our Class-S non-corrosive uPVC single-hung windows feature LoĒ³-366 coatings (SHGC < 0.22) and multi-point marine-grade stainless steel hardware that withstand coastal winds and salt atmospheric corrosion without degradation.
As a dedicated B2B OEM/ODM manufacturer, we operate an end-to-end vertically integrated facility. By controlling profile extrusion, precision CNC corner welding, insulating glass manufacturing, and automated hardware assembly under one roof, we eliminate intermediate markup and enforce uncompromising quality control.
Every unit fabricated in exact 1/8" (3mm) increments to match contractor rough openings, eliminating costly site adjustments.
Seaworthy wooden crating, corner edge protectors, and vacuum foil wrapping tailored for direct shipments to Genoa, La Spezia, and Trieste ports.
Send your architectural CAD/BIM window schedules for engineer thermal review and wind-load calculations.
Rapid physical sample tooling and profile mockups dispatched via air express for Italian jobsite signoff.
Extrusion, thermal testing, glass unit assembly, and 100% pre-shipment water tightness validation.
Commercial, technical, and regulatory clarity for foreign trade procurement managers and architectural buyers.
Yes. All fenestration products manufactured for export to Italy undergo rigorous initial type testing (ITT) under UNI EN 14351-1 criteria. We provide complete CE declaration of performance (DoP) documentation detailing Air Permeability (EN 12207), Watertightness (EN 12208), Resistance to Wind Load (EN 12210), and Thermal Transmittance ($U_w$) calculations derived in accordance with EN ISO 10077-1.
Absolutly. Because we extrude profiles in-house and engineer custom tooling, we fabricate single-hung units tailored directly to Italian thermal sub-frame dimensions (monoblocco termico). Frame depths can be adapted with specialized nail fins, masonry retrofitting flanges, or flush frame profiles depending on jobsite requirements.
Our vinyl compound utilizes 100% virgin uPVC blended with high-purity Rutile Titanium Dioxide ($TiO_2$) and advanced organic heat stabilizers rated for EN 12608 Class S (Severe Climate). This micro-structure prevents yellowing, surface micro-cracking, and impact degradation even under prolonged high solar irradiance in Southern Italy, Sicily, and Sardinia.
Our baseline OEM/ODM order volume is tailored for full container loads (20GP or 40HQ), which typically accommodate 250 to 550 units depending on call sizes. Standard manufacturing lead time is 18–25 days from drawing sign-off, with direct ocean transport to major Italian container ports (Genoa, La Spezia, Naples, Trieste) averaging 28–35 transit days.
Our modern single-hung profiles incorporate dual tilt-in latches on the operable sash. The sash smoothly unlatches and pivots inward 90 degrees into the room, enabling safe and effortless exterior glass cleaning from inside the building—an essential convenience feature for urban multi-story residential blocks.
We provide a comprehensive B2B limited warranty covering: 20 years on vinyl profile structural integrity and color retention; 15 years against insulating glass seal failure (fogging/condensation); and 10 years on operating hardware and counterbalance spring systems. Full warranty sheets are provided with commercial contracts.
Partner with an established OEM/ODM vinyl window manufacturer. Contact our engineering team today for technical CAD audits, U-value compliance sheets, and wholesale container pricing.