Factory-direct OEM/ODM solutions customized for residential, commercial, and hospitality projects in the Philippines.
Years Engineering Excellence
Typhoon Wind Load Rating
Virgin Vinyl & T6 Aluminum
Acoustic Noise Reduction
The National Building Code of the Philippines (PD 1096) and the National Structural Code of the Philippines (NSCP 2015) impose stringent structural and environmental requirements on building envelopes across Luzon. Metro Manila experiences intense tropical conditions: severe monsoon rainfall (Habagat), intense solar UV radiation, extreme thermal expansion cycles, and destructive Category 5 Super Typhoons generating localized wind pressures exceeding 250 km/h.
Standard imported doors and window profiles frequently fail under Manila’s demanding operational environment, leading to frame warping, seal degradation, water ingress during driven rains, and rapid finish oxidation caused by airborne salt-fog in coastal zones like Manila Bay, Pasay, and Parañaque.
OEM/ODM Technical Precision: Our exterior door profiles feature high-concentration Titanium Dioxide (TiO₂) uPVC formulations and PA66GF25 thermal-break aluminum structures engineered specifically for UV index values exceeding 11+ and wind load pressures up to 3,500 Pascals (ASTM E330).
From die extrusion to complete unit glazing, our vertically integrated manufacturing facility provides complete design freedom for developers, architects, and importers across the Philippines.
We utilize precision extrusion lines to produce multi-chamber uPVC and thermal-break aluminum profiles. Corner joints are fusion-welded into a seamless monolithic structure, eliminating mechanical screw joints that shrink, loosen, or leak over time.
Choose from AkzoNobel PVDF architectural powder coatings, anodized silver/bronze treatments, or exterior-grade Renolit foil laminations engineered to withstand surface temperatures up to 75°C without fading, chalking, or delaminating.
Equipped with heavy-duty multi-point locking mechanisms from premium hardware partners (HOPO, Siegenia, Coto). Concealed stainless steel 316 hinges ensure maximum forced-entry protection and coastal corrosion resistance.
Every unit is fabricated to order in 1/8-inch precision increments. We comfortably accommodate custom architectural shapes—arched transom doors, trapezoids, oversized sliding patio configurations, and multi-panel folding door layouts.
In-house insulating glass (IGU) lines produce dual and triple-glazed units filled with 90%+ Argon gas, incorporating triple-silver Low-E coatings (LoĒ³-366 equivalent) to reflect solar infrared radiation while maximizing natural day-lighting.
Factory Acceptance Testing (FAT) is conducted for air tightness, water tightness, structural deflection, and hardware cycle lifetime (20,000+ cycles) before crate packing, fully compliant with ISO 9001 and CE export guidelines.
Our OEM/ODM exterior doors are tailored for diverse real estate archetypes throughout the National Capital Region (NCR) and neighboring provinces.
High-altitude exterior balcony doors in Bonifacio Global City and Makati face severe elevated wind pressures and continuous solar radiation. Our heavy-duty aluminum sliding and French patio doors feature reinforced mullions and low SHGC glazing, offering whisper-quiet interior acoustics alongside maximum structural safety during typhoon season.
Waterfront properties in coastal Luzon suffer rapid material degradation caused by ocean salt spray and high humidity. Our fusion-welded uPVC exterior swing doors and lifting slider systems use non-metallic composite reinforcement options and 316-grade hardware, ensuring 100% rustproof durability and zero maintenance.
Luxury residential subdivisions require custom architectural aesthetics coupled with high security. We engineer bespoke grand entrance doors, thermal-break bi-fold doors, and vintage arched patio systems featuring decorative internal grills, matching traditional heritage or sleek modern tropical designs.
Evaluate profile choices against the severe climate factors of Metro Manila to make informed OEM/ODM procurement decisions.
| Performance Metric | Amar Tropical uPVC Profile | Thermal Break Aluminum | Traditional Timber Doors |
|---|---|---|---|
| Wind Pressure Resistance (ASTM E330) | Up to 3,500 Pa (Steel Reinforced) | Up to 4,500 Pa (Structural T6) | 1,200 – 1,800 Pa (Delamination Risk) |
| Salt Spray Corrosion (ASTM B117) | 100% Corrosion Proof (Non-reactive) | Excellent (PVDF / Anodized Finish) | Poor (Rot, Mold & Termite Damage) |
| Thermal Conductivity (U-Factor) | 0.26 – 0.30 W/m²K (Ultra Low) | 0.32 – 0.38 W/m²K (Insulated) | 0.45 – 0.60 W/m²K (High Loss) |
| Water Ingress Limit (ASTM E331) | 700 Pa (Welded Monolithic Frame) | 600 Pa (E-Gasket Drain System) | 250 Pa (Corner Joint Leakage) |
| Acoustic Isolation (STC Rating) | STC 40 – 44 dB | STC 38 – 42 dB | STC 28 – 32 dB |
| Maintenance Requirement | Zero Maintenance (Wipe Clean) | Low Maintenance | High (Annual Varnish / Sealing) |
Navigating international shipping to the Philippines requires rigorous packing standards and seamless customs coordination. We provide comprehensive export packaging solutions specifically designed for transpacific maritime transport and local port handling at:
Tropical-Sealed Export Packaging: Every door assembly is individually wrapped in anti-scratch protective film, corner-shielded with high-density EPE foam, and enclosed in ISPM-15 compliant fumigation-free solid wooden crates. Desiccant packs are inserted inside every container load to prevent sea-freight condensation damage (container rain).
Expert answers addressing structural standards, importation procedures, and technical specifications for Philippine buyers.
Our doors are engineered to exceed NSCP 2015 wind load requirements. Profiles are structurally reinforced with 1.5mm–2.0mm hot-dipped galvanized internal steel chambers or extruded from 6063-T6 structural aluminum. They undergo rigorous ASTM E330 testing up to 3,500+ Pa, ensuring full structural resilience against PAGASA Signal No. 5 typhoon wind pressure.
Yes, absolutely. As a dedicated OEM/ODM manufacturer, every unit is custom-built to your exact shop drawing specifications in 1/8-inch (3mm) increments. We produce oversized sliding panels, bi-fold systems, arched transoms, and custom sidelights directly from our tooling dies.
Standard production manufacturing takes 15 to 25 working days depending on order volume and custom finish requirements. Maritime transit from our export port to Manila International Container Terminal (MICT) typically takes 7 to 12 days, allowing for fast, reliable project delivery schedules.
We utilize tropicalized compound formulations containing high concentrations of Rutile Titanium Dioxide (TiO₂) and organic UV stabilizers. This prevents thermal degradation, surface chalking, and yellowing even when exposed to continuous Philippine solar UV index levels exceeding 11+.
For coastal applications in Batangas, Palawan, or Manila Bay, we supply 100% Stainless Steel 316 grade multi-point locks, hinges, and handles. Our hardware passes 1,000-hour neutral salt spray testing (ASTM B117) to guarantee smooth operational life without binding or rusting.
Yes. We provide complete CAD and BIM architectural drawings for project sign-off. Profile cross-section samples, corner weld cuts, and glass performance swatch kits can be dispatched via DHL/FedEx directly to your office in Manila.
Send your architectural door schedule, CAD drawings, or project requirements directly to our engineering export department. We provide line-by-line commercial quotes within 24 hours.
