Precision-extruded, CE-marked fenestration systems tailored for tropical coastal climates, high acoustic damping, and extreme wind load resistance.
Mumbai presents one of the most demanding built environments in South Asia for exterior fenestration systems. The city combines high atmospheric humidity (averaging 80-90% during monsoon months), intense solar radiation, heavy saline air corrosion along the coastal belts (such as Marine Drive, Worli Sea Face, and Bandra West), and extreme seasonal rainfall exceeding 2,500 mm annually. Furthermore, the rapid growth of high-rise skyscrapers in Lower Parel, BKC (Bandra-Kurla Complex), and Prabhadevi requires architectural openings to withstand positive and negative wind pressure forces up to 3.0 kPa at heights exceeding 150 meters.
Standard architectural doors and imported non-certified profile systems frequently suffer from structural deflection, seal degradation, water infiltration, and surface oxidation within 24 to 36 months of installation in Mumbai. To solve these specific local challenges, our engineering team manufactures CE Certified French Doors and multi-chamber fenestration systems designed to meet European Norm EN 14351-1 for water tightness, air permeability, structural loading, and thermal transmittance (U-factor).
Key Engineering Gain: CE-certified French door assemblies extruded with tropicalized, UV-stabilized uPVC (Class EN 12608) or thermal break aluminum prevent profile yellowing, thermal warping under high UV index, and coastal saltwater oxidation—offering a verified service life exceeding 30 years.
During the South-West Monsoon, wind-driven rain hits high-rise residential facades at velocities over 100 km/h. Traditional wooden hinged doors or non-welded aluminum frames leak at corner joints and bottom tracks. Our CE Certified French Doors feature fusion-welded corners with integrated EPDM continuous gasket seals and dual weather-stripping lines. The threshold incorporates a concealed sloped drainage weep-channel with non-return pressure valves, ensuring water column resistance rated up to 1,050 Pascals (Class E1050 per EN 12208).
Designed for real estate developers, structural consultants, and luxury interior architects in Western India.
Triple-silver Low-E coating engineered to minimize Solar Heat Gain Coefficient (SHGC < 0.25) while keeping visible daylight transmittance high (VLT > 64%). Essential for reducing HVAC loads in tropical Mumbai summer climates.
Heavy urban noise from traffic on the Western Express Highway and coastal arterial roads is attenuated using unequal glass pane thickness (e.g., 6mm + 12mm Argon + 8mm Laminated) for maximum sound reduction (Rw > 42 dB).
Unlike mechanically screwed frames that loosen and leak over time, our uPVC frames feature 100% fusion-welded corner joints, creating a single leak-proof monolithic frame structure capable of enduring heavy daily cycle operation.
Equipped with European multi-point shoot-bolt locking mechanisms along the entire frame height, heavy-duty adjustable hinges, and toughened safety glass to guarantee high burglary resistance and storm security.
For high-density residential developments and luxury coastal properties in Mumbai, choosing certified fenestration directly impacts building sustainability, insurance compliance, tenant comfort, and long-term asset value. The table below illustrates the operational parameters tested under EN standards.
| Performance Standard | Standard Local Aluminum / Wood Doors | Amar CE Certified uPVC French Doors | Amar Thermal Break Aluminum French Doors |
|---|---|---|---|
| CE Certification (EN 14351-1) | Non-certified / Self-declared | Fully Certified | Fully Certified |
| Thermal Transmittance (U-Value) | > 4.5 W/m²K (High heat ingress) | 1.3 - 1.6 W/m²K | 1.7 - 2.0 W/m²K |
| Watertightness Rating (EN 12208) | Class 2A - 3A (< 150 Pa leak point) | Class E1050 (1,050 Pa Monsoon Proof) | Class 9A (600 Pa High Storm Proof) |
| Acoustic Rating (STC / Sound Damping) | 22 - 26 dB (Poor traffic isolation) | 38 - 44 dB (Acoustic Laminated) | 36 - 42 dB (Double Glazed) |
| Salt Spray Corrosion Resistance | Oxidizes/corrodes within 3 years | 100% Corrosion-Proof (Virgin Vinyl) | Qualicoat Class 2 Powder Coated |
| Wind Pressure Resistance (EN 12210) | Class 2 (1,000 Pa) | Class C5 / P3 (3,000 Pa) | Class C5 / P3 (3,000 Pa) |
Our export division has delivered tailored fenestration shipments directly to major residential, hospitality, and commercial infrastructure projects across the Mumbai Metropolitan Region (MMR). Below are primary architectural deployment scenarios:
Challenge: Oceanfront skyscrapers above the 30th floor encounter extreme structural wind pressure during cyclones, as well as driving monsoon rain that causes water penetration in standard balcony doors.
Solution: Double French swing door assemblies with reinforced steel internal armature, LoĒ³-366 low-emissivity double glass, and multi-point lock shoot-bolts certified to withstand wind pressure up to 3,000 Pa without structural deflection.
Challenge: Direct coastal exposure leads to aggressive salt-air corrosion, degrading metal hinges, locks, and frames while UV radiation causes profile discoloration.
Solution: Extruded virgin tropical uPVC French swing door systems with marine-grade 316 stainless steel hardware fittings and UV-stabilized titanium dioxide (TiO2) formulation, ensuring maintenance-free operation with zero rust or peeling.
Challenge: Energy efficiency mandates (IGBC / LEED rating compliance) combined with strict acoustic insulation requirements to shield executive conference rooms from urban traffic noise.
Solution: Thermal break aluminum French patio doors fitted with 28mm acoustic laminated glass packages, cutting ambient exterior sound levels by over 40 decibels while lowering central HVAC cooling costs.
Challenge: Developers require mass-customized door sizes built to precise architectural schedules with rapid installation timelines and dependable factory-direct delivery.
Solution: Made-to-order manufacturing in 1/8-inch sizing increments, palletized and crated for direct container shipment into Nhava Sheva (JNPT) Port, offering streamlined installation with reduced site fitting labor.
As a vertically integrated manufacturer and international exporter, Amar Engineered Products handles every stage of production in-house—from raw profile extrusion, reinforcement fitting, and glass unit assembly to export packaging and container loading. This eliminates middleman markups and guarantees rigorous quality assurance compliant with global standard ISO 9001:2015.
Every window and French door unit is fabricated strictly according to your structural opening schedule. No oversized fillers, trim compensation, or site alteration required.
Shipments destined for Mumbai are packed using moisture-resistant film wraps, corner foam cushions, and fumigated solid timber export crates designed for sea container freight.
We provide full engineering documentation, CAD elevation shop drawings, structural wind load calculations, and CE declaration of performance (DoP) certificates for architect approval.
Technical details regarding importing, compliance, installation, and climate durability.
CE Certification under EN 14351-1 verifies that the entire door system—including frame, sash, glass, gaskets, and threshold—has undergone lab testing for air infiltration, structural load, and watertightness. Unlike non-certified doors, our systems use fusion-welded corners and multi-chamber internal drainage systems tested to withstand continuous wind-driven rain pressure up to 1,050 Pa (Class E1050), preventing water ingress during extreme monsoon storms.
Our uPVC profiles are extruded using 100% virgin tropicalized vinyl containing high concentrations of titanium dioxide (TiO2), making them completely immune to salt-air corrosion, oxidation, and UV degradation. For metal preference, our Thermal Break Aluminum systems feature Qualicoat Class 2 architectural powder coating or anodized finishes that pass 3,000 hours of continuous salt-spray exposure testing without pitting or flaking.
Orders are consolidated, crated, and loaded into 20ft or 40ft high-cube ocean containers. Containerized freight ships directly to JNPT (Nhava Sheva Port, Mumbai). Typical ocean transit time ranges from 18 to 25 days depending on the shipping line. Our export team coordinates bill of lading (B/L), packing lists, custom invoices, and origin certificates for seamless customs clearance through your designated local freight broker.
Yes. For developments near heavy traffic zones like the Western Express Highway, SV Road, or Link Road, we recommend our specialized acoustic insulating glass packages. These utilize asymmetric double glazing (e.g., 6mm toughened glass + 12mm argon gap + 8.38mm acoustic PVB laminated glass), achieving Sound Transmission Class (STC) ratings over 42 dB to convert noisy urban environments into peaceful indoor spaces.
Absolutely. Because we control profile extrusion and frame welding in-house, we manufacture custom arch tops, trapezoids, double swing doors with integrated side-lights, and transom panels on the same engineered profile platform. Every unit is made to order in 1/8-inch precision increments.
We provide a comprehensive International Manufacturer's Limited Warranty covering profile structural integrity, fusion welds, color fastness against yellowing/cracking, and insulated glass seal integrity against desiccant breakdown or fogging. Replacement hardware or components are dispatched via priority air freight if warranty claims arise.
