Explore our certified range of custom-built casement, awning, hung, hopper, and slide fenestration systems tailored for commercial and residential developments in Greece.
The Greek architectural landscape is experiencing an unprecedented evolution. From the stark contemporary villas perched on the cliffs of Mykonos and Santorini to high-density urban residential revamps in Athens and Thessaloniki, dark aesthetic exterior fenestration—specifically matte black and deep anthracite uPVC laminated windows—has become the premier specification choice for modern architects. However, deploying dark vinyl profiles in Mediterranean microclimates poses unique thermodynamic and chemical challenges that generic uPVC importers consistently fail to solve.
Standard black exterior coatings or surface-painted vinyl profiles absorb up to 90% of incident solar radiation. In Southern Greece and the Aegean Islands, peak summer surface temperatures on dark frames can exceed 78°C (172°F). Without specialized extrusion technology, this heat accumulation causes linear thermal expansion, frame warping, seal degradation, and rapid surface chalking due to severe ultraviolet (UV) exposure.
The Technical Advantage: Our black laminated vinyl window profiles utilize multi-layer acrylic foil co-extrusion technology featuring Solar Heat Reflective (Cool Colors) pigments. These IR-reflective formulations reject the near-infrared spectrum of sunlight, reducing surface heat absorption by up to 15°C compared to conventional black profiles, preventing profile distortion under extreme Hellenic UV loads.
While thermally broken aluminum has historically dominated Mediterranean commercial construction, structural uPVC vinyl profiles engineered by Amar Engineered Products present superior thermal insulative metrics required under the Greek National Energy Performance of Buildings Regulation (KENAK). Aluminum relies on polyamides to bridge thermal gaps, creating failure points over decades of thermal cycling. In contrast, multi-chambered virgin uPVC profiles are inherently non-conductive.
Every corner joint of our black laminated vinyl window systems undergoes high-temperature fusion welding. By melting the profile frame and sash corners into a single monolithic structural unit, mechanical fasteners, corner cleats, and elastomeric sealants are completely eliminated. This eliminates corner joint separation and air infiltration across decades of continuous operation.
| Performance Indicator | Standard Black Aluminum | Amar Black Laminated uPVC | Greek KENAK Target (Zone B/C) |
|---|---|---|---|
| Frame Thermal Transmittance ($U_f$) | 2.4 – 3.1 W/m²K | 0.95 – 1.2 W/m²K | ≤ 1.90 W/m²K |
| Glass Thermal Transmittance ($U_g$) | 1.4 W/m²K (Standard Double) | 0.6 – 1.0 W/m²K (LoĒ³-366 Argon) | ≤ 1.30 W/m²K |
| Salt Spray Corrosion (ISO 9227) | Pitting after 1,000 hrs | Immune (5,000+ hrs Tested) | High Coastal Grade |
| Corner Joint Tensile Strength | Screwed Cleat / Glue (Variable) | Monolithic Fusion Weld | EN 12608 Class A |
| Acoustic Isolation ($R_w$) | 32 – 35 dB | Up to 45 dB (Laminated IGUs) | ≥ 38 dB Urban |
Building in Greece requires tailored engineering strategies to handle distinct localized environmental forces—from high-velocity Meltemi winds in the Cyclades to urban heat island effects in Attica.
Luxury residential projects in Mykonos, Santorini, Paros, and Corfu demand architectural minimalism with extreme weather tolerance.
Retrofit and modern residential developments in Attica require high acoustic damping and solar heat control.
Hotels and resort developments in Crete and Rhodes focus on low maintenance, guest comfort, and long-term operating ROI.
Projects in Thessaloniki, Larissa, and Ioannina experience sharp thermal swings from freezing winters to scorching summers.
Every window unit delivered to our Greek partners is manufactured in our factory under strict ISO 9001 and CE quality management protocols. Below are the engineering pillars of our fenestration systems:
Extruded from 100% virgin uPVC compound with 5 to 6 thermal chambers, incorporating heavy-duty galvanized steel reinforcements for maximum structural load capacity.
Exterior Renolit FX laminated foils featuring heat-reflective technology, backed by a 10-year exterior colorfastness warranty against intense solar exposure.
Double and triple insulating glass units (IGUs) filled with 90% high-purity argon gas, equipped with stainless steel warm-edge spacer technology.
The Greek fenestration market is undergoing a seismic shift driven by both regulatory compliance and architectural preference:
As a vertically integrated manufacturer, Amar Engineered Products manages the entire supply chain—from profile extrusion and foil lamination to IGU assembly and export logistics container crating. We supply commercial distributors, developers, and trade contractors direct from factory floor to shipping ports across Greece.
Containerized Export Packaging: All orders destined for Piraeus, Thessaloniki, or Heraklion ports are individually labeled by opening schedule, wrapped in protective corner guards, and secured inside ocean-ready ISPM-15 certified wooden crates for safe transit.
No. Our black laminated profiles utilize specialized IR-reflective acrylic foils ("Cool Colors" technology) combined with high-grade virgin uPVC resin. This technology reflects solar radiation in the near-infrared spectrum, keeping profile surface temperatures well below thermal deformation thresholds even during extreme summer heatwaves in Southern Greece.
Yes. All window systems meet European CE marking specifications and surpass energy performance standards mandated by the Greek KENAK framework. We provide full NFRC and European standardized testing documentation for U-factor, SHGC, air tightness, and wind load resistance for municipal permit sign-offs.
Vinyl is completely non-metallic and chemically inert, making it 100% immune to salt-spray corrosion, pitting, and oxidation. Unlike painted aluminum windows which suffer from filiform corrosion near the sea, our uPVC frames require no repainting and maintain their structural and visual integrity indefinitely in island environments.
Yes. Every unit is custom-extruded and fabricated in 1/8-inch (3mm) precision increments according to your site window schedule. We fabricate standard casements, tilt-and-turn units, sliders, single-hungs, as well as complex architectural arches, trapezoids, and multi-lite stack units from the same matching black foil platform.
Standard fabrication takes 2 to 3 weeks depending on schedule size. Orders are palletized and packed into ocean containers for direct shipment to Piraeus, Thessaloniki, or direct island ports. Our logistics team handles full export documentation and bill of lading consolidation.
We provide a comprehensive factory-direct limited lifetime warranty covering profile structural integrity, fusion-welded seams, insulating glass seal integrity against desiccant failure, and a 10-year colorfast warranty on exterior black laminated foils.
